Possible graphics card failure -- further update

Discussion in 'DIY Computers' started by Zxs, Jul 1, 2011.

  1. Zxs

    Andrew Guest

    "Andrew" wrote in message news:iunlkc$ird$...
    OK, now I'm thoroughly baffled. Although it wouldn't work at 3.4GHz with
    the memory underclocked at 755MHz, I set it to a 1:1 memory ratio and put
    the FSB way up at 400 for 3.6GHz on the CPU and the usual 800MHz for the
    RAM. It works fine!!! Maybe the RAM just didn't know what to make of the
    strange speed(?) and set some timings it couldn't handle.

    Prime95 is stable after 50 minutes of running, with temps peaking at 58
    degrees compared to 52 at stock speed. That's still lower than the temps
    were with the Intel cooler at stock speed. I'll leave it running all night
    to make sure.
     
    Andrew, Jul 3, 2011
    #21
    1. Advertisements

  2. Zxs

    Rob Guest

    Worth it just for the spam removal IMO. 'Pre-cleaned' usenet
    groups are *much* nicer to inhabit.
    Cheers,
     
    Rob, Jul 4, 2011
    #22
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.